PP PE multilayer extrusion film英文MSDS报告部分法规

 Hazards Identification Hazards Identification: Invasion route: Inhalation, ingestion, eyes, skin contact. Health hazards: 1.Under the normal condition of industrial application, skin contact do not cause skin absorption hazard and irritate, but product debris can cause mechanical irritating to eye.2.Melts can cause severe thermal burns.3. Fumes produced during burning may cause eye, skin and respiratory system irritation. Severe may result in nausea, headache, chills or fever. Environment hazards: Combustion products cause air

- Composition/Information on Ingredient Pure □ Admixture □ Composition: Chemical Name In % By Weight CAS No. EC No. Molecular Formula PE 65% 9002-88-4 200-815-3 (C2H4)n PP 35% 9003-07-0 - (C3H6)n Abbreviation: CAS No. is Chemical Abstract Service Registry Number. EC No. is European Inventory of Existing Commercial chemical

First Aid Measures Skin contact: Immediately cool the skin by rinsing with cold water after contact with product melts. Wash off immediately with soap and plenty of water. Eyes contact: Lifting the upper and lower eyelids, flush the eyes with plenty of water or saline water after contact with product debris. Inhalation:Excess fumes produced during burning,remove from exposure and move to fresh air immediately,maintain peogaster patency,give oxygen when breathing difficulty. Ingestion:Swallowing accident,get medical aid immediately.

Physical and Chemical Properties Appearance and characteristic: Solid Water solubility: Insoluble in water Color: Transparent Odor: Odorless pH: No information. Relative density: No information. Melting point : No information.

详情咨询上海昌茵检测技术有限公司